October Sweater: Part Two--Building a Waist

How's your sweater going? Mine has had some ups and downs. Or maybe I should say ins and outs?

Before we talk about the ins and outs of waist shaping, let's recap.

We're knitting the October sweater from Elizabeth Zimmermann's Knitter's Almanac. I'm using JojoLand Melody Superwash in color MS11 that I picked up at a local yarn store.

I guesstimated my gauge at about 7 stitches per inch on US#1. I measured a favorite sweater at 37" around with moderate waist shaping. 7 x 37 = 259. I know I like a bit of negative ease and I wanted a "better" number, so I chose to cast on 256 stitches.

For lots of reasons, I decided to cast on provisionally and plan to knit down when I decide on the hem treatment. I had some Koigu KPPM left over from socks. I cast on using the Koigu, knit two garter ridges flat, then joined in the round and knit two more rows. Why the garter ridges flat? Simple--the last couple of times I've twisted my joins. Since these first rows are going to be taken out later, it doesn't matter and saves me from myself.

I knit about an inch, then started my waist decreases. Now that we're caught up, let's talk about waist decreases.

Shaping a Waist
Styles come and go, but the style now is to show off our feminine physique with waist shaping. For this sweater, I'm opting for some very slight shaping, so I'll do all my adjustments at the sides of the sweater. If I wanted extreme shaping--where the sweater actually hugged my curves--I'd do decreases at four points around the sweater.

We can get all technical about how to calculate the decreases, or we can do it very simply. The easiest way: measure a sweater you like. There, done. The more precise way? Take the measurements on your body.

My favorite sweater has a defined waist over about 9"--it goes in for 4.5" and then goes out for 4.5". Looking at my own body, I'll tweak those numbers slightly--I'll go in from hip to waist for 4" and out from waist to bust for 5", with a bit of a flat space in between.

But how much? I want the smallest part of my sweater to be 3" smaller than my hip/bust. If we trust my gauge at 7 spi, I need to take out 21 stitches. The number has to be even, so let's pick 20. Since each decrease row removes 4 stitches, that means I need 5 decrease rows evenly spaced over 4".

A quick check of my knitting shows I'm getting about 8 rows to the inch--but since I've only knit 1", this isn't very precise. That means 4 inches is about 32 rows. 32 divided by 5 = 6.4. Since I'd rather err on the side of decreasing too slowly (and I don't trust my gauge), I'm going to knit a decrease row, followed by 6 rows plain, and repeat for 5 decrease rows.

Talking about Decreases

I place markers to delineate 3 stitches at each side "seam" of the sweater. I have 125 stitches front and back, and 3 stitches between markers at each side. See, I told you 256 was a pretty number.

My decreases are placed on either side of these markers. Ahh...but which decreases! You know, I never remember. I understand that k2tog is a right-slanting decrease and ssk is a left-slanting decrease, but I never remember why I'd want left or right slanting. I looked it up. Use a right slanting decrease on the left side of the front. I swear I'm spatially challenged--is that my left or your left?

But this is an EZ sweater. Pick a method, use it consistently. If it is technically wrong, we'll consider it a design element. This is a sweater with lovely varigating yarn--who'll notice?

So here's my decrease plan:

Decrease row: knit 3 stitches to first marker, SM (slip marker), k2tog, knit 123 stitches (two stitches before next marker), ssk, SM, knit 3, SM, k2tog, knit 123, ssk

*Knit a decrease row
Knit 6 rows.
Repeat from * 4 more times (total of 5 decrease rows knit).
Knit 6 more rows plain (to lengthen the waist). Then begin increase section.

OMG!!! Have you been reading TechKnitter's latest stuff about left leaning decreases? Fascinating reading and I played around with one of her decreases. It didn't work for me as well as my normal SSK, but that's knitting for you!

I'm finished with my waist decreases and ready to evaluate the fit of my sweater, but let's do that another day, shall we? This post is already a bit lengthy.

Want some spinning pron to distract you?

From this:

To this. Yummmm....Blue Moon Fiber Arts Sheep to Shoe Kit in Fire in the Mountain

Let's Knit a Sweater

I'm not going to apologize for not blogging. I is what I is. Like many knit-bloggers, I've been sucked in by Ravelry and my blog suffers.

Before I go too far, let me just thank you for your comments on my FiFi. I wish I liked it better! I think I need to overdye it a different color for me to really like it. If you looked at the current state of my stash, you'd probably suggest Orange. Everything I buy seems to be orange.

I did, by the way, lengthen FiFi considerably. Lots and lots. Probably 4" longer. Since it is knit from the top down, it was easy to just keep knitting. I had to by the yarn in a bag of 10, so I had lots of yarn available.

Just for some project pron, here's what I recently finished:


Pattern: Autumn Rose
Source: Simply Shetland 4
Yarn: Jamieson's Shetland Spindrift--exactly as specified in pattern
Size: 37"
Ease: 1" of negative ease
Needle: US 2 for most, US 0 and 1 where specified.
Gauge: 30 stitches over 4"
Modifications: Modified the colors used in the neckline ribbing to provide a more interesting gradient. The pattern says to use a larger needle size for the sleeves. I missed that and didn't do it.
Started: September 2007 (early)
Finished: September 2007 (late) Total time was about 3 weeks.
Techniques used:
Color knitting with 2 hands, stranded not woven.
Spit splicing at the color changes when I remembered.
Used a german twisted cast-on for the corrugated ribbing using two strands of yarn and a US 4 needle. There's more pictures of this in my flickr stuff.

Here's what's on the needles:

Pattern: Lady Eleanor
Source: Scarf Style
Yarn: Noro Silk Garden Lite--I'll look up the color code before I'm done
Size: it will be around 23" x 72" without fringe
Needle: US 7 (I think, I need to double check)
Modifications:
Since my yarn is so much lighter than that called for and I'm using a much smaller needle, I started with 8 triangles rather than 7. I'll also do several more rows of rectangles to get the correct length.

Pattern: Bartholomew's Tantalizing Socks
Source: Cat Bordhi's new sock book!
Yarn: Handspun Merino Tencel from Abby Franquemont in the color Autumn Harvest
Size: Pretty darn small. I wear a size 5.5 shoe
Needle: US 1 or 0--another one to double check
This has been a weird and interesting story--I'll have to show you my sock surgery in another post. I knit the first sock, started on the second, and decided I hated the first sock and that it was too small. After finishing the second, I loved it, so I went back and cut up the first sock. I should finish this one today.

An Almanac Sweater Journal

I have an idea, let's knit a sweater together. The sweater I'm going to knit is the October sweater from Elizabeth Zimmermann's Knitter's Almanac. There are two versions of this sweater: top-down and bottom-up. While I'd like to do a top-down sweater, I don't really see the point for this sweater. Let's just do the bottom up. In typical EZ style, we're really going to design our own sweater.

The basic style of this sweater is a bottom-up raglan golf shirt. EZ shows it with short sleeves. I'm going to do 3/4 sleeves if I have enough yarn. If not, I can change my mind later. There's a nice golf-shirt style placket at the neckline and a typical collar. I suppose I could knit some fancy stitch pattern, but no. This is going to be a simple stockinette sweater suitable for my southern California life.

To start the sweater, we need to do 3 things before we start knitting:
· Choose our yarn
· Decide on needle size
· Sketch out a schematic with measurements.

Choosing the yarn
Here's two simple truths I've learned in knitting sweaters. First, bulky yarn knits up much faster than thin yarns. Second, I look like crap in bulky sweaters and never wear them. This is a sporty golf shirt. I'm going to opt for a fairly light yarn and face the reality that this means lots of mindless stockinette.

I really wanted to use handspun for the rest of my Almanac projects. I spun up some lovely pastel romney and plied it with corriedale. The result is a 800 yards of gorgeous light worsted weight yarn. No way is that 800 yards going to be enough. Off it goes to the stash.

My second option is to pick something from my stash. How about some Elsbeth Lavold Silky Wool? That would be nice. Or I could use the Rowan yarns I picked for an abandoned project and do something with stripes?

Ahh, but one of my favorite local yarn stores is having an anniversary celebration sale. Everything in the store is on sale. Off we go to the yarn store. Oooh, shiny! In a moment of impetuous abandon, I pick up 1300 yards of JoJoLand Melody. I later realize that's not enough yarn, go back, buy more. More, more, more! I'm still a bit worried that I may not have enough yarn, so I'm going to plan for that contingency as I knit.



Decide on needle size

Let's face a harsh reality, shall we? Gauge swatches are (as Harlot says) filthy little liars. I have no illusions about my ability to knit a perfect gauge swatch, calculate how many fractions of a stitch there are, etc. I just want to get a rough idea about what needle produces a reasonable fabric. Since I know swatches aren't sweaters, I also realize that the fabric I create in a swatch may be slightly different than the sweater. OK, I can live with that.

I also know, from past experience, that my circular knitting gauge is really close to my flat knitting gauge. Not that this makes any difference because gauge swatches are still filthy little liars. The "right" thing to do is to cast on something about the size of a hat, knit a bare minimum of 4 inches, but better yet, just knit the whole hat, wash it, block it, and then carefully measure in at least 3 different locations around the hat.

My usual technique is to make an educated guess, cast on for the sleeves and go for it. My sleeve becomes my swatch. If my educated guess is pure fiction, than it isn't a big issue to frog 4" of sleeve and start again. This is no more effort than knitting a swatch and it gets me started on my sweater. I'm not going to do that this time because I'm not sure how long I'm going to make my sleeves. I may end up with only enough yarn for short sleeves.

I look at the ball band. It recommends a gauge of 7 to 8 stitches per inch and US 1 to 3 needles. If this were handspun, I'd look at one of those charts that correlate wraps per inch and needle size. Let's aim for 7 stitches to the inch. I cast on 28 stitches (4 inches x 7 stitches per inch) on US 3 needles. I knit a couple of rows in garter, flat. Then I start stockinette. After about an inch, I grab my favorite measuring tool: an index card. This one is 4" x 6". I lay the card over my knitting and instantly see I'm nowhere near 4", probably closer to 6". I knit a row of garter using new needles (US 1) and continue on my happy way. After about another inch, I see that I'm much closer to my 4" and the fabric looks pretty good. I continue on for another inch and see that the fabric is something I can live with and my swatch is indeed 4" wide. I should probably continue on for another couple of inches, bind off, block and see if I still like the fabric.

I’d love to show you a picture of my swatch but I ripped it out. You may all point and laugh if this sweater ends up small enough to fit my dog or big enough to cover my car. I'm taking a risk here, but an educated risk. A wool sweater is easily blocked if I’m off by an inch or so.

Before we all panic that I’m knitting a sweater on US 1, let’s be smart. I wanted a gauge of 7 stitches per inch. If I got that gauge with US3 needles, I wouldn’t be having these palpitations. However, I’d still be knitting the same number of stitches, wouldn’t I? If you want to have a fit, have a fit about 7 stitches per inch, not the size of the needle.

Sketch out a schematic with measurements
I started by taking some measurements of a sweater I know I like.

Here's a rough sketch of my sweater. I used a CAD program to draw this because I use CAD programs all the time. A sketch on the back of a napkin would suffice. The key thing is to get the width and length measurements on paper so I don't cheat later. (I'm famous for deciding that I really like sweaters that are 10" from hem to armhole after several weeks of knitting mindless stockinette.) I took the measurements from a favorite sweater or two. I've added just a little bit of shaping--ever so slight. EZ's original pattern was straight and straight would be fine. I just want to break up my knitting with some detail to focus on. I've discovered that I look good in straight sweaters with negative ease at the bust. The sweater stretches over the bust and then snugs in a bit below to fit loosely around the waist--giving an illusion of shaping without actually clinging to my waist. So don’t hesitate to omit the shaping.

Since I know I want a 37" sweater and I'm knitting 7 stitches to the inch, I'll need 259 stitches. I'm only going in 2" at the waist, so I'll decrease down to 245 stitches. I don't really have to worry about that right now, so let's just move on and talk about the decreases when we're ready.


Casting On
As you know, I'm not sure I have enough yarn. I can entertain lots of creative options. I can add stripes. I can make the sleeves shorter. I can decide to make the whole sweater shorter. But the sweater will look pretty funky if I decide to add stripes only in the yoke because I ran out of yarn. I'm going to cast on in the middle and work my way up. If I start running short of yarn, I can use a contrasting yarn at the hem of the sweater, echo the contrast at the sleeves and the collar. Casting on in the middle is really easy--use a provisional cast on. This also gives me some time to think about what fancy hem treatment I want to use. I'll start at the upper hip level just before the decreases start.

I know of at least 3 ways to do a provisional cast on. EZ uses a very, very fast cast on. The only downside is I'm not EZ. When I do this cast on, I sometimes get some loose stitches when I go back and start knitting the other way. I really don't want a loose line of stitches accentuating my ample hip line. So I'm not going to use that.

Another way is to start with a crochet chain. I've used that before and it works. I still risk the line of loose stiches, but I could probably make it work.

My third way is the slowest and least efficient, but it is very neat and tidy. I just cast on with some scrap yarn, knit 3 or 4 rows, then start knitting with my real yarn. Later on, I carefully pick up the stiches and just cut out the scrap yarn. Since neatness is important to me, I'm going to use this technique. I want to make sure to use some slick yarn for this of a similar weight. I happen to have some Rowan Cotton Glace left over from an earlier project. It is a bit heavier that my Melody. I think I'll dig around and find some leftover sock yarn. I’ll just to a backward loop cast on—it is going to be removed later anyway.

I'm going to wrap this up, go cast on my 259 stitches and knit for 1". When I get to that point, I'll come back and we can talk about waist shaping.

Risk Assessment
As any good project manager knows, you need to know where the risks are and mitigate the risks. My risks, or nagging concerns, are:

Gauge: Always gauge. I’ll be sure to take the sweater off the needles and measure it frequently—both with a ruler and by trying it on.

Yarn Choice: This is a really fine yarn. I’m concerned that the resultant fabric will be too light and thin for a practical sweater. I’m also concerned because the neckline of my sweater is steeked. This is a superwash wool. I think I can mitigate this risk by using a sewing machine to reinforce the steek, but I need to know up front that this may not be the right yarn for my design and be prepared to abandon ship if I see problems once I start knitting.

I'm going away now to finish the socks and then cast on this sweater. I'll come back soon. Thanks again for all the great comments!

Sock Sillies

Aren't these fun! MaryLynn, my blogless sister-in-law, was going on about how much she wants mismatched socks. So I made these. For me. Yes, MaryLynn, for ME.

I bought a small sampler pack of hand-dyed romney when I went to the Santa Monica Fiber fest. I whipped out the spinning into a 3-ply worsted and knit these up loosely based on a Kathryn Alexander pattern from the Spin-Off book Socks!. I took that same sock template from my June post and just did a toe-up sock and played with the colors. The leg is, of course, entrelac. It is a bit baggy because I blocked the socks over something larger that my significant calves.

The knitting took me about 4 evenings. I had so much fun I didn't want to put them down.

On a less silly note, here's the Solstice Slip socks from the Blue Moon Fiber Art's Rockin' Sock Club 2007.

These socks feel great on the feet. I'm not a big fan of the short row heel, but I have to admit it is growing on me. I love the way the garter feels.

Finished Object: Fifi

Fifi Finished4
Originally uploaded by K2Karen

Matilda is an easy companion. She never worries whether she looks fat. She doesn't have to put on makeup or fix her hair before photo shoots. My DH adds that she doesn't require new shoes on a weekly basis.

This is FiFi, from French Girl Knits in Rowan Calmer. Ahh, it feels good to finally get something done.

I've been knitting very steadily lately and seemed to have recovered from my Startitis infection. Finished my Solstice Slip socks. Almost done with an amazing pair of socks from some homespun that don't match and include entrelac. I'll show you those later. For now, you get Fifi.

Oooohh, Shiny!

One of the things I don't like about Ravelry--it encourages startitis. I read about some fun project and want to start it now. I read about some yarn on sale and click, click, click--my new yarn is on the way.

I have, however, been making some progress--albeit on shiny distractions. Here's what's on my needles at the moment:




Solstice Slip, Blue Moon Fiber Arts Socks That Rock Lightweight in Firebird. A Sock Club selection.
One down, one to go. Fun sock, btw. This one fits so nicely and I really enjoyed knitting it.



Fifi from FrenchGirl in Rowan Calmer. I'm having trouble capturing this color. It is much prettier than this. It is a soft lavender. I'm about 80% done with this one. I've decided I'm going to knit one tank top/shell a month. This is my August entry.

But this is the one that is completely messing up all my other goals and blogging and sleeping and eating:



Autumn Rose by Eunny Jang from the book Simply Shetland 4. I bought the kit from Two Swans and I simply can't stop knitting on this one. Aren't the colors great? (Someone will probably roll their eyes at my less-than-perfect fair isle knitting, but I'm having fun and I don't care!)

You will all excuse me, won't you? I have a Saving Grace to watch and a second sleeve to knit.

What a Pal!

What a Pal!

My sockapalooza pal is the greatest. Wanna see? (Warning: Corgi picture heavy post--did I tell you I got a new camera?)

First, a great box--with my favorite color peaking out: lime green.

And then...a really cool row counter she made herself:

And some fun gifties--including chocolate!

Do you see what I see? It didn't take the corgis long to find that some of the gifties were for adorable puppies!

Dancer--always the good dog--assumed that she wasn't supposed to steal them. So she tried to pretend they didn't exist by looking away.

Tango, of course, tried to steal them:

And then insisted they belonged to him and only him:

After we became obedient corgis, we all got one rawhide chew to enjoy.

Of course, there were also SOCKS!!! Aren't they gorgeous? Don't you love how they match the skirt I was already wearing? And they fit perfectly.

Julie's the greatest, don't you think? The corgis want to know when the next swap starts. They're ready.

Sockapalooza 4

Darling daughter is having one of those days. Just now, she lost her cell phone. She sent me down to the Tai Kwon Do studio to see if she left it there. After much bowing, I still didn't have a phone. Guess where it was? On the bathroom floor. Earlier today, she went to get her nails done, but didn't have enough money. Oh, Mom?

But today was a good day. I got a great e-mail first thing this morning. My sockapalooza pal said my package was mailed today! All through this process of putting together a package for my sock pal, I never thought about the fact that someone was making something for me. I know, I know, that's the whole point, but I just didn't think about it. It gives me a warm fuzzy feeling to think that someone out there was knitting something special just for me.

While I was out taking number one daughter her money, I dropped my sockapalooza package off at the UPS Store. What a great place! Those folks are so organized and friendly. I actually like taking my shipping there.

Oh yeah, here's a picture of the complete package. I hope the socks fit. Do you think she'll like it?

(Socks; 1 skein colinette jitterbug; a monkey backpack thingy; a monkey pencil pouch; the sockapalooza commememorative project bag; and an Ella Fitzgerald CD to listen to while knitting)